Intelligent Fabric Wrinkle Elasticity Tester YG(B)541EZ

[Instrument Name]：Intelligent Fabric Wrinkle Elasticity Tester

[Calibration Certificate]：Shanghai Branch of the National Textile Metrology Station / Shanghai Textile Group Testing Standards Co., Ltd. Certificate No.:ZZ-202503799

[Drafting standard]：Enterprise Standard  Q/WZC004YG(B)541EZ

[Scope of Application]: It is used for testing the recovery performance of textiles after folding.

[Relevant Standards]: GB/T3819, ISO2313, AATCC66, M&S, etc.

[Instrument Features]:

1. Fully enclosed darkroom design ensures that external factors do not affect the results during the experiment, avoiding errors caused by the testing environment;

2. Rotary station design improves work efficiency;

3. A robotic arm automatically applies and unloads the weight, reducing the workload of the experimenter and human error;

4. Stepper motor automatic flipping ensures smooth flipping action and effectively eliminates the influence of flipping vibration on the sample’s return angle;

5. CCD automatic imaging, dynamic and static image processing, automatic capture of crease angles, and real-time image saving provide original evidence in case of disputed test results; it can also provide a large number of original data samples required for scientific research and teaching. 6. Testing stations 1-10 can be randomly selected (n/10, n:1-10) for testing, while other stations can be left idle. This facilitates the selection of single or multiple sets of data, greatly improving work efficiency.

7. During a single test, users can choose between rapid or slow spring creases, or a dual-mode (rapid or slow spring). The CCD camera captures the crease angle after 15 seconds for rapid spring creases and then captures it again after 5 minutes for slow spring crease angles.

8. The testing software includes a built-in electronic protractor, accurately measuring (0-180)°, and can correct data based on imaging results, avoiding measurement blind spots and other complex testing situations.

9. The testing software provides static and dynamic image processing and supports various data statistics, analysis, storage, and output methods.

[Technical Parameters]:

1. Working Mode: Microcomputer control, rotary station, CCD imaging, fully computerized automatic image and data processing

2. Imaging Sensor: CCD

3. Rebound Time: Rapid rebound: (15±1) s; Slow rebound: 5min±5s

4. Pressure Load: (10±0.05) N

5. Pressing Time: 5min±5s

6. Pressing Area: (18×15) mm

7. Angle Measurement Range and Accuracy: (10～170)°±0.1°

8. Stations: 10 stations

9. Power Supply: AC220V±10% 50Hz

10. Dimensions: (742×634×740) mm (L×W×H)

11. Weight: 45kg